StripMeister Original Pro Wire Stripper for Drill

The StripMeister Original Pro wire stripper strips wire from #18 AWG to 250 MCM. This range includes diameters from 0.08 to 0.79 inches or 2 to 20.1 mm. The adjustable blade depth and guide hole system ensure clean cuts across the entire range without damaging copper conductors.

Yes. The StripMeister Original Pro wire stripper for drill works with any standard corded or cordless drill. For optimal performance, do not exceed 350 RPM on your drill. The drill-powered design provides effortless operation without requiring a dedicated motor or electrical outlet.

Yes. The StripMeister Original Pro wire stripper strips both copper and aluminum wire cleanly using the same setup process. Use the smallest guide hole that fits the wire diameter, adjust the blade depth carefully, and run a test sample. The heat-treated tool-steel blade delivers precise insulation removal on both conductor types.

Yes. The StripMeister Original Pro wire stripper includes a built-in Romex adapter and strips Romex, THHN, stranded cable, solid wire, and twisted wire efficiently. All wire types strip cleanly when the blade depth is properly adjusted. ULTRA GRIP Feeder Technology grips kinked or irregular cable securely for jam-resistant operation.

The StripMeister Original Pro wire stripper operates at your drill speed, typically processing small to medium cable efficiently in manual batches. Stripping speed depends on wire diameter, insulation type, and blade depth calibration. Setup is quick with wire reference indicators that reduce setup time between different wire sizes by up to 75%.

Cut a small sample of the same wire first. Choose the smallest guide hole that fits, then touch the knife off to establish initial contact. Run slowly and lower the knife until copper is just visible without cutting the conductor. Strip the remaining wire; ULTRA GRIP Feeder Technology maintains consistent tension and eliminates wire slippage throughout the batch.

ULTRA GRIP Feeder Technology provides smooth, jam-resistant stripping even with twisted or tangled scrap wire. The system uses contoured feeding guides that maintain steady grip and consistent tension through the stripping process. This eliminates wire slippage, reduces rework, and keeps production moving with less downtime on job sites and recycling yards.

The StripMeister Original Pro wire stripper handles speaker wire and audio cable within its #18 AWG to 250 MCM range. Most standard speaker wire falls within this capacity and strips cleanly. Wire smaller than #18 AWG is generally too small for mechanical stripping because insulation thickness becomes minimal and copper strands are fragile.

Cat5, Cat6, and telephone wire are normally 20 and 22 gauge wire, making them too small for the StripMeister Original Pro wire stripper. The smallest wire size this wire stripper can handle is #18 AWG. Wire smaller than #18 AWG has minimal insulation thickness and fragile copper strands that are not suitable for mechanical stripping.

The StripMeister Original Pro wire stripper is manufactured in Canada with precision 5-axis CNC milling technology. It features solid aircraft-grade aluminum body construction with a stress-proof steel drive shaft. The heat-treated tool-steel blade and stainless-steel rear wire guide deliver long-term durability, straighter tracking, and consistently centered cuts for professional-grade reliability.