See why the Original StripMeister with ULTRA-GRIP feels unstoppable: the feeder applies up to 70 lbs of pulling force to keep round, flat, and even kinked cable moving—no slips, fewer jams, faster results. This intro shows the feed and blade working together to bite the jacket cleanly and push through tangles, so more copper ends up in the bin and less time is spent fighting wire

Get dialed in fast. This walkthrough shows how to secure the machine, choose the right guide opening, and set wire angle plus blade depth so you slice jacket—not copper. See a test pass on different gauges, how to stop side-slipping with a small angle tweak, and when to nudge the guide for repeatable feeds. Whether you’re on the drill-powered Original or the electric E250, these steps set you up for cleaner cuts and smoother runs from the first pull.

Set up your StripMeister E350 the right way—fast. This walkthrough shows how to mount the machine solidly, choose the right guide opening for your cable, and dial the wire angle with blade depth so you cut jacket, not copper. You’ll see a slow first pass to confirm alignment, how to nudge the guide for repeatable feeds on different sizes and shapes, and simple tweaks to prevent slips or jams. Follow these steps and your E350 will run smoother, strip cleaner, and pay back quicker from the very first pull.

Set up your StripMeister E1000 the right way—fast. This walkthrough shows how to use the E1000’s two wire guides to match your cable, then dial the wire angle and blade depth so you cut jacket, not copper. Watch a short test pass and see how a tiny guide adjustment keeps the feed straight for clean, repeatable strips on different sizes and shapes.