Skip to main content

Topic : E2000x

Specifications

What is the blade depth of the StripMeister E2000X

For the StripMeister E2000X, the blade depth is 0.725″ however the StripMeister E2000X can handle up to 3.125″ OD with insulation on.

How long will it take to receive my StripMeister E2000X?

We utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister within 5 to 7 …

Can the StripMeister E2000X run on 220 Volts?

The StripMeister E2000X can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for…

Where can I register my StripMeister E2000X?

You can register your StripMeister by clicking the corresponding link below. United States Registration Page Canada Registration Page

What voltage does the StripMeister E2000X run off of?

The StripMeister E2000X runs off any standard 110/120V household outlet.

What type of fuse does the StripMeister E2000X use?

The StripMeister E2000X takes a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find th…

What are the shipping dimensions of the StripMeister E2000X?

The StripMeister E2000X shipping dimensions are 22′ wide x 25″ High x 19″ deep.

How many phases is the StripMeister E2000X?

The StripMeister E2000X has 1 phase.

How much does the StripMeister E2000X weigh?

The StripMeister E2000X weighs 72 lbs.

What size wire can I strip with the StripMeister E2000X?

The StripMeister E2000X can strip between 16 AWG to 2000 MCM or .1″ to 3-1/8″ in diameter.

What is the rated input of the StripMeister E2000X?

The StripMeister E2000X rated input is 10.8 AMP.

What is the frequency of the StripMeister E2000X Motor?

The StripMeister E2000X motor’s frequency is 60Hz.