Skip to main content

Topic : E1000

Specifications

Does the StripMeister E1000 require a 20 amp 120 volt receptacle for it’s feed?

Below you will find the rated input for the StripMeister E1000. North America: 110- 120 V AC/10.0A, 60Hz, single phase Europe: 200-220 V AC/5.0…

How long will it take to receive my StripMeister E1000?

We utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister within 5 to 7 …

Can the StripMeister E1000 run on 220 Volts?

The StripMeister E1000 can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for …

Where can I register my StripMeister E1000?

You can register your StripMeister by clicking the corresponding link below. United States Registration Page Canada Registration Page

What voltage does the StripMeister E1000 run off of?

The StripMeister E1000 runs off any standard 110/120V household outlet.

What type of fuse does the StripMeister E1000 use?

The StripMeister E1000 takes a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the…

What are the shipping dimensions of the StripMeister E1000?

The StripMeister E1000 shipping dimensions are 20′ wide x 20″ High x 16″ deep.

How many phases is the StripMeister E1000?

The StripMeister E1000 has 1 phase.

How much does the StripMeister E1000 weigh?

The StripMeister E1000 weighs 40 lbs.

What size wire can I strip with the StripMeister E1000?

The StripMeister E1000 can strip between 18 AWG to 1000 MCM or .11″ to 1.4″ in diameter.

What is the rated input of the StripMeister E1000?

The StripMeister E1000 rated input is 3A.

What is the frequency of the StripMeister E1000 Motor?

The StripMeister E1000 motor’s frequency is 60Hz.