How fast can the StripMeister Original Strip Wire?

Depending on the power of the machines RPM, diameter, condition of and type of wire the following is an approximate estimate.

Running the drill at 300 RPM will on average strip 350ft per minute.

Running the drill at 150 RPM will on average strip 175ft per minute.

Where can I purchase a replacement feeder shaft assembly for my StripMeister Original?

You can order a replacement feeder shaft by clicking this link or by calling our customer service at 1-800-681-8494 Monday through Friday 8:00am – 8:00pm EST

Where does your StripMeister Original Wire Stripping Machine ship from?

Our StripMeister Original wire stripping machine will ship from the closest distribution center to the delivery address.

How long will the blade last on the StripMeister Wire Stripping Machine?

The blade on the StripMeister wire stripping machines are precision engineered for each machine and will last anywhere from eight thousand feet of scrap wire all the way to forty thousand feet of scrap wire.

What is your return and refund policy?

We know your StripMeister will provide you many years of flawless wire stripping

However, if you are not completely satisfied with your StripMeister, please contact us and have your transaction # handy.

TOLL FREE: 1-800-681-8494 Monday to Friday 8:00am – 8:00pm (Eastern Time)

If a return is required, please note the following:

StripMeister Original (WSM001) Return Policy

  1. Any unit returned for refund must have all original packaging and contents included in the shipment.
  2. The customer is responsible for the shipping costs to have the unit returned back to Wire Strip Meister Inc.
  3. All returns must be made within 30 days from the date of purchase.
  4. A refund will ONLY be issued if the unit has been unused. Should the unit show evidence of usage and wear, a refund will not be applicable and the unit will be shipped back to you.

StripMeister E500, E1000 and E2000 Return Policy

  1. Any unit returned for refund must have all original packaging and contents included in the shipment.
  2. The customer is responsible for the shipping costs to have the unit returned back to Wire Strip Meister Inc.
  3. All returns must be made within 30 days from the date of purchase.
  4. Any unit returned will be subject to a 30% restocking charge.
  5. A refund will ONLY be issued if the unit has been unused. Should the unit show evidence of usage and wear, a refund will not be applicable and the unit will be shipped back to you.

 

Do I need any special tools for replacing parts?

Replacing parts on the StripMeister wire stripping machines is extremely easy and all you need is a 4mm Allen key.

Do I have to use a specific type of drill gun to run the StripMeister wire cutter?

No. The StripMeister is the ideal wire stripper due to that fact that it will accommodate any drill gun with a min. 5/16″ drill chuck or larger making it the best wire stripper around!

How fast can I run the drill gun?

For optimum performance, we recommend that you do not exceed 350 RPM on your StripMeister copper wire stripper.

How can I purchase a replacement blade for the Original StripMeister wire stripper?

Replacement blades for the StripMeister automatic wire stripper can be ordered straight off of our webpage or by following this link.

What types of wire can I cut with the StripMeister?

The StripMeister automatic wire stripping machine can strip house wire, Romex 1 & 2, XLP, THNN, XHHW, welding cable, rubber cord, old style cloth insulation and tray cable just to mention a few!

What sizes of wire can I cut with the StripMeister automatic wire stripper?

This StripMeister automatic wire stripper can cut wire from #18 AWG to 250 MCM  Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm)