What is the return policy of the StripMeister E1000?

StripMeister E1000 Return Policy:

1. Prior to returning, call or email us for a return number, have your transaction # available.

2. Any unit returned for refund must have all original packaging and contents included in the shipment.

3. The customer is responsible for the shipping costs to have the unit returned back to Wire Strip Meister Inc.

4. All returns must be made within 30 days from the date of purchase.

5. Any unit returned will be subject to a 30% restocking charge.

6. A refund will ONLY be issued if the unit has been unused. Should the unit show evidence of usage and wear, a refund will not be applicable and the unit will be shipped back to you.

What is the warranty that comes with the StripMeister E1000?

  • StripMeister E1000 is warrantied for one (1) year from the date of purchase against manufacturer’s defects in workmanship and material. The warranty is valid only for the original purchaser with proof of purchase. Wire Strip Meister Inc. will, at its option, repair or replace the StripMeister E1000. Notwithstanding the foregoing, the StripMeister E1000 knife blade is not covered by any warranty.
  • The warranty does not extend to damage caused by abuse, misuse, accidental damage, neglect, lack of proper installation, lack of proper operation, normal wear and tear, deterioration of exterior finish (including scratches dents, or any corrosion or discoloring by heat, abrasive or chemical cleaners) or arising from use for professional commercial or rental purposes.
  • Wire Strip Meister Inc. disclaims all other warranties and conditions, express or implied, including without limitation, implied warranties and conditions of merchantability and fitness for any particular purpose.
  • The customer’s exclusive remedy for a breach of warranty will be the repair or replacement of the StripMeister E1000 as determined by Wire Strip Meister Inc.

What type of fuse does the StripMeister E1000 take?

The type of fuse to be used on the StripMeister E1000 is a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can purchase additional fuses through Allied Electric by following this link .

Where can I purchase a replacement blade for the E1000?

You can order replacement blades by clicking this link or by calling our customer service at 1-800-681-8494 Monday through Friday 8:00am – 8:00pm EST

How fast does the StripMeister E1000 strip wire?

The StripMeister E1000 wire stripper can strip wire at a rate of 16-85 feet per minute.  StripMeister recommends using the variable speed control to start slow and as the wire feeds through the StripMeister to increase the speed to a comfortable pace.

How long will the blade last on the StripMeister Wire Stripping Machine?

The blade on the StripMeister wire stripping machines are precision engineered for each machine and will last anywhere from eight thousand feet of scrap wire all the way to forty thousand feet of scrap wire.

Where can I purchase oil for my StripMeister Automatic Wire Stripper?

Oil for your StripMeister automatic wire stripping machine can be purchased by clicking this Link.

What is your return and refund policy?

We know your StripMeister will provide you many years of flawless wire stripping

However, if you are not completely satisfied with your StripMeister, please contact us and have your transaction # handy.

TOLL FREE: 1-800-681-8494 Monday to Friday 8:00am – 8:00pm (Eastern Time)

If a return is required, please note the following:

StripMeister Original (WSM001) Return Policy

  1. Any unit returned for refund must have all original packaging and contents included in the shipment.
  2. The customer is responsible for the shipping costs to have the unit returned back to Wire Strip Meister Inc.
  3. All returns must be made within 30 days from the date of purchase.
  4. A refund will ONLY be issued if the unit has been unused. Should the unit show evidence of usage and wear, a refund will not be applicable and the unit will be shipped back to you.

StripMeister E500, E1000 and E2000 Return Policy

  1. Any unit returned for refund must have all original packaging and contents included in the shipment.
  2. The customer is responsible for the shipping costs to have the unit returned back to Wire Strip Meister Inc.
  3. All returns must be made within 30 days from the date of purchase.
  4. Any unit returned will be subject to a 30% restocking charge.
  5. A refund will ONLY be issued if the unit has been unused. Should the unit show evidence of usage and wear, a refund will not be applicable and the unit will be shipped back to you.

 

How fast does the StripMeister E500 and E2000 strip wire?

The StripMesiter E500 and E2000 wire strippers can strip wire at a rate of 70 to 110 feet per minute.  StripMeister recommends using the variable speed control to start slow and as the wire feeds through the StripMeister to increase the speed to a comfortable pace.

Do I need any special tools for replacing parts?

Replacing parts on the StripMeister wire stripping machines is extremely easy and all you need is a 4mm Allen key.

What types of wire can I cut with the StripMeister?

The StripMeister automatic wire stripping machine can strip house wire, Romex 1 & 2, XLP, THNN, XHHW, welding cable, rubber cord, old style cloth insulation and tray cable just to mention a few!