FREQUENTLY ASKED QUESTIONS
-
General
-
Where can I purchase a StripMeister wire stripping machine?
Our machines are not available in stores. In order to offer you the great prices we have, we cut out the middle man and sell direct on our websites.
-
How fast will I get my StripMeister wire stripping machine?
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister Original within 5 to 7 business days.
-
Is my payment secure and credit card safe?
100% yes! We use Stripe Payment Solutions and PayPal as payment processors. They are leaders in online payment processing and online security. Using your credit card or PayPal account on our site is more secure than giving your credit card info over the Phone or at a store in many cases. We also use Secure Socket Layer certificates to ensure your personal data is transmitted securely.
-
Do you ship your cable stripper overseas?
We currently ship our StripMeister wire strippers throughout the United States, Canada and Europe.
-
What are the payment options for purchasing the StripMeister online?
When purchasing a StripMeister automatic wire stripper, you can select your preferred payment method during checkout. Available secure payment options are PayPal, Visa, MasterCard and American Express.
-
How do I know which StripMeister Machine is best for me?
Everyone has different requirements from stripping basic scrap wire like Romex to huge piles of 2000MCM from large demo jobs. Therefore in order to help you decide on the right machine for your needs you can simply check out our StripMeister comparison page where you can choose by industry, job position or wire capacity or even better you can use our useful selector tool which assists you in seconds to find the right machine for your needs.
-
What is the Return on investment with the StripMeister wire stripping machines?
There are many variables involved of course in how quick they will pay for themselves. We have some general info below on the following machines which are theoretically written as actual data provided by customers is vague and varies from hours to days depending on wire size and quantity.
StripMeister Original
http://www.stripmeister.com/justifying-the-stripmeister-original-when-copper-prices-are-down/
StripMeister E1000
http://www.stripmeister.com/how-quickly-does-e1000-pay-for-itself/
-
Do I have to put anything down?
When you choose Klarna at checkout as your payment method, it will do a soft credit check to see if you instantly qualify. Then from there you will only need to make your first payment and your machine will be sent to you if you were approved.
-
Where can I purchase a StripMeister wire stripping machine?
-
Original
-
How fast can I run the drill gun?
For optimum performance, we recommend that you do not exceed 350 RPM on your StripMeister copper wire stripper.
- How do I use the StripMeister Original?
-
Is there an upgrade kit for my StripMeister Original?
Yes! We offer a retro fit kit to upgrade your StripMeister Original with a 1/4 hp variable speed motor. Click here to learn more.
-
Can the StripMeister Original strip Cat 5, Cat 6 or telephone wire?
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister Original to strip. The smallest wire size the StripMeister Original can do is #18 gauge wire.
-
Can the StripMeister Original Strip #14 AWG?
Yes, the StripMeister Original can strip #14 AWG. In fact, it can strip down to #18 AWG and up to 250 MCM.
-
What is the most recommend way to secure the device to strip wire?
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
-
What sizes of wire can I strip with the StripMeister Original automatic wire stripper?
This StripMeister automatic wire stripper can strip wire from #18 AWG to 250 MCM Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm)
-
How fast can the StripMeister Original Strip Wire?
Depending on the power of the machines RPM, diameter, condition of and type of wire the following is an approximate estimate.
Running the drill at 300 RPM will on average strip 350ft per minute.
Running the drill at 150 RPM will on average strip 175ft per minute. -
What are the shipping dimensions of the StripMeister Original?
The StripMeister Original shipping dimensions are 8″ wide x 5″ High x 4″ deep.
-
How much does the StripMeister Original weigh?
The StripMeister Original weighs 5 lbs.
-
How long will it take to receive my StripMeister Original?
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister Original within 5 to 7 business days.
-
Can the StripMeister Original Strip Speaker Wire?
The StripMeister Original can strip most speaker wire. Speaker wire can range from 10 AWG to 24 AWG. The StripMeister Original can strip as small as 18 AWG or .09″ in diameter with insulation on.
-
Can the StripMeister Original Strip #16 AWG?
Yes, the StripMeister Original can strip #16 AWG. In fact, it can strip down to #18 AWG and up to 250 MCM.
-
What is the largest size wire I can strip with the StripMeister Original?
The largest size wire the StripMeister Original can handle is 250 MCM or 0.79″ OD with insulation on. We have several other StripMeister models that can strip larger wires. To find the best StripMeister for you, please click here.
-
Where can I buy replacement cutting wheels for the StripMeister Original?
To purchase the StripMeister Original cutting wheel please click here.
-
Where can I buy a replacement feeder shaft assembly for my Original StripMeister?
To purchase the StripMeister Original feeder shaft assembly please click here.
-
The part I need is not listed on the site. What can I do?
To purchase a part that is not listed on our site contact our support directly at 1-800-681-8494
-
Do I need any special tools for replacing parts?
Replacing parts on the StripMeister wire stripping machines is extremely easy and all you need is a 4mm Allen key.
-
Do I have to use a specific type of drill gun to run the StripMeister Original wire cutter?
The StripMeister is the ideal wire stripper due to that fact that it will accommodate any drill gun with a min. 5/16″ drill chuck or larger making it the best wire stripper around!
-
How to stop the wire from slipping to the side when stripping?
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
-
How fast can I run the drill gun?
-
E250
-
How fast can the StripMeister E250 strip wire?
The StripMeister E250 can strip between 70 and 110 feet per minute with the adjustable speed control.
-
What type of motor does the StripMeister E250 have?
The StripMeister E250 features a 1/4 HP 110-240 VAC 60/50hz single phase DC motor with a variable speed controller.
-
What is the frequency of the StripMeister E250 Motor?
The StripMeister E250 motor’s frequency is 60Hz.
-
What is the rated input of the StripMeister E250?
The StripMeister E250 rated input is 3A.
-
What sizes of wire can I cut with the StripMeister E250 wire stripper?
The StripMeister E250 wire stripper can cut wire from #18 AWG to 250 MCM Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm)
-
How much does the StripMeister E250 weigh?
The StripMeister E250 weighs 19 lbs.
-
How many phases is the StripMeister E250?
The StripMeister E250 has single phase.
-
What are the shipping dimensions of the StripMeister E250?
The StripMeister E250 shipping dimensions are 10″ wide x 12″ High x 16″ deep.
-
What type of fuse does the StripMeister E250 use?
The StripMeister E250 takes a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse. You can find the fuse by clicking this link.
-
What voltage does the StripMeister E250 run off of?
The StripMeister E250 runs off any standard 110/120V household outlet.
-
Can the StripMeister E250 run on 220 Volts?
The StripMeister E250 can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
-
How long will it take to receive my StripMeister E250?
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister E250 within 5 to 7 business days.
-
Can the StripMeister E250 strip Cat 5, Cat 6 or telephone wire?
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister E250 to strip. The smallest wire size the StripMeister E250 can do is #18 gauge wire.
-
What is the most recommend way to secure the device to strip wire?
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
-
How to stop the wire from slipping to the side when stripping?
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
-
Where can I check the fuse on the StripMeister E250?
To check the fuse on the StripMeister E250 follow these 4 easy steps:
- Unplug the StripMeister E250
- Remove the drive cover
- Remove the 4 M3 screws
- Lift the cover carefully up and on the back side is the fuse
If the fuse needs to be replaced:
To replace the StripMeister E250 fuse you will need a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse (Allied Electronic #70160407). You can find the fuse by clicking this link.
Drive Cover
Back cover where screws are located
The Fuse Location
-
What is the StripMeister E250 blade made of?
The StripMeister E250’s blade is made from heat treated and hardened tool steel for unbeatable quality.
-
How is the StripMeister E250 blade manufactured?
The StripMeister E250 blade is CNC machined.
-
What type of grease should I use on my StripMeister E250?
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general purpose white grease that is low odor, non staining, NLGI grade 2 grease.
-
I recently bought the StripMeister E250 model and was wondering if it came with gear oil already in it or if I had to buy my own before I could use it?
All of our machines come ready to use out of the box. Unpack your StripMeister and plug it in and begin stripping.
-
What type of maintenance is required on the StripMeister E250?
Maintenance
To ensure smooth operation of your StripMeister E250 we recommend a maintenance of the following:
Make sure the machine is unplugged before performing any maintenance
1. Check oil level on the gear box monthly.
Before checking the oil, make sure the gear box is not hot. If oil is visible when the screw is removed from Oil filler hole on the gear box, the unit is still full. If not visible top up with manufacturers recommended gear oil (ISO VG320 or Petro of China CN320) until full.
For gear oil visit website: http://www.pdblowers.com/pr91-roots-synthetic-lubricant-iso-vg-320-quart.php
2. Inspect blade for damage
3. Inspect and clean Feeder Drive of dirt and debris
4. Inspect whole machine for any loose parts
-
How fast can the StripMeister E250 strip wire?
-
E350X
-
How fast can the StripMeister E350X strip wire?
The StripMeister E350 can strip between 70 and 110 feet per minute with the adjustable speed control.
-
What type of motor does the StripMeister E350X have?
The StripMeister E350X features a 1/4 HP 110-240 VAC 60/50hz single phase DC motor with a variable speed controller.
-
What is the frequency of the StripMeister E350X Motor?
The StripMeister E350X motor’s frequency is 50/60Hz.
-
What is the rated input of the StripMeister E350X?
The StripMeister E350X rated input is 3A.
-
What sizes of wire can I cut with the StripMeister E350X wire stripper?
The StripMeister E350X wire stripper can cut wire from #18 AWG to 500 MCM Diameters from 0.100″ (3mm) up to 1.04″ (24.1mm) including ROMEX and braided (stranded) wire.
-
How much does the StripMeister E350X weigh?
The StripMeister E350X weighs 22 lbs.
-
What are the dimensions of the StripMeister E350X?
The dimensions of the StripMeister E350X are 14x11x17 inches
-
What type of fuse does the StripMeister E350X use?
The StripMeister E350X takes a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse. You can find the fuse by clicking this link.
-
What voltage does the StripMeister E350X run off of?
The StripMeister E350X runs off any standard 110/120V household outlet.
-
Can the StripMeister E350X run on 220 Volts?
The StripMeister E350X can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
-
How long will it take to receive my StripMeister E350X?
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister E350X within 5 to 7 business days.
-
What is the most recommend way to secure the device to strip wire?
We recommend using the provided hardware to fasten your StripMeister to a workbench or table.
-
Can the StripMeister E350X strip Cat 5, Cat 6 or telephone wire?
Cat 5, Cat 5, and telephone wire are normally 22 and 20 gauge wires making it too small for the StripMeister E350X to strip. The smallest wire size the StripMeister E350X can do is #18 gauge wire.
-
How to stop the wire from slipping to the side when stripping?
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
-
How is the StripMeister E350X blade manufactured?
The StripMeister E350 blade is CNC machined.
-
What is the StripMeister E350X blade made of?
The StripMeister E350X’s blade is made from heat treated and hardened tool steel for unbeatable quality.
-
What type of grease should I use on my StripMeister E350X?
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general-purpose white grease that is a low odor, nonstaining, NLGI grade 2 grease.
-
I recently bought the StripMeister E350X model and was wondering if it came with gear oil already in it or if I had to buy my own before I could use it?
All of our machines come ready to use out of the box. Unpack your StripMeister and plug it in and begin stripping.
-
What type of maintenance is required on the StripMeister E350X?
Maintenance
To ensure the smooth operation of your StripMeister E350X we recommend the maintenance of the following:
Make sure the machine is unplugged before performing any maintenance
1. Check the oil level on the gearbox monthly.
Before checking the oil, make sure the gearbox is not hot. If the oil is visible when the screw is removed from Oil filler hole on the gearbox, the unit is still full. If not visible top up with manufacturers recommended gear oil (ISO VG320 or Petro of China CN320) until full.
For gear oil visit website: http://www.pdblowers.com/pr91-roots-synthetic-lubricant-iso-vg-320-quart.php
2. Inspect the blade for damage
3. Inspect and clean Feeder Drive of dirt and debris
4. Inspect the whole machine for any loose parts
-
How fast can the StripMeister E350X strip wire?
-
E1000
-
How fast can the StripMeister E1000 strip wire?
The StripMeister E1000 can strip between 16 and 85 feet per minute with the adjustable speed control.
-
What type of motor does the StripMeister E1000 have?
Features a 1/2 HP 110-240 VAC 60/50hz single phase DC motor with a variable speed controller.
-
What is the frequency of the StripMeister E1000 Motor?
The StripMeister E1000 motor’s frequency is 60Hz.
-
What is the rated input of the StripMeister E1000?
The StripMeister E1000 rated input is 3A.
-
What size wire can I strip with the StripMeister E1000?
The StripMeister E1000 can strip between 18 AWG to 1000 MCM or .11″ to 1.4″ in diameter.
-
How much does the StripMeister E1000 weigh?
The StripMeister E1000 weighs 40 lbs.
-
How many phases is the StripMeister E1000?
The StripMeister E1000 has 1 phase.
-
What are the shipping dimensions of the StripMeister E1000?
The StripMeister E1000 shipping dimensions are 20′ wide x 20″ High x 16″ deep.
- What type of fuse does the StripMeister E1000 use?
-
What voltage does the StripMeister E1000 run off of?
The StripMeister E1000 runs off any standard 110/120V household outlet.
-
Can the StripMeister E1000 run on 220 Volts?
The StripMeister E1000 can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
-
How long will it take to receive my StripMeister E1000?
We utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister within 5 to 7 business days.
-
Does the StripMeister E1000 require a 20 amp 120 volt receptacle for it's feed?
Below you will find the rated input for the StripMeister E1000.
North America: 110- 120 V AC/10.0A, 60Hz, single phase
Europe: 200-220 V AC/5.0A, 50Hz, single phaseIf you have any further questions please feel free to call us Monday through Friday 8 am – 6 pm Eastern Standard Time for support
-
Where can I check the fuse on the StripMeister E1000?
To check the fuse on the StripMeister E1000 follow these 4 easy steps:
- Unplug the StripMeister E1000
- Locate the panel below the power button.
- Remove the 4 M3 screws
- The fuse will be located directly inside.
If the fuse needs to be replaced:
To replace the StripMeister E1000 takes a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the fuse by clicking this link.
-
How to stop the wire from slipping to the side when stripping?
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
-
Can the StripMeister E1000 strip Cat 5, Cat 6 or telephone wire?
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister E1000 to strip. The smallest wire size the StripMeister E1000 can do is #18 gauge wire.
-
Can the StripMeister E1000 strip cloth cable?
With there being so many different types of wire out there you will find that the StripMeister E1000 can strip a large majority of wire. We have tested Southwire cloth coated cable that is 750KCMIL with an OD of ~1.3′ and the thickness of the insulation jacket was ~0.2″ . The StripMeister E1000 stripped this wire with no problems.
If you have a specific wire you would like StripMeister to test for you please call us at 1-800-681-8494 and we can assist you with testing your wire on our machines.
-
What is the most recommend way to secure the device to strip wire?
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
-
What type of grease should I use on my StripMeister E1000?
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general purpose white grease that is low odor, non staining, NLGI grade 2 grease.
-
Where do I grease on my StripMeister E1000?
On the StripMeister E1000 there are 3 grease nipples. The first 2 are in the back of the machine on the knife carriage and these are for the knife slider. The other grease nipple is on the side of the StripMeister E1000 above the Caution sign. To see precisely where these nipples on the StripMeister E1000 is please consult page 6 of the StripMeister E1000 owners manual.
To see what type of grease you need click this link.
-
How fast can the StripMeister E1000 strip wire?
-
E2000X
-
How fast can the StripMeister E2000X strip wire?
The StripMeister E2000X can strip between 70 and 110 feet per minute with the adjustable speed control.
-
What type of motor does the StripMeister E2000X have?
The StripMeister E2000X features a 1 HP DC motor with a variable speed controller.
-
What is the frequency of the StripMeister E2000X Motor?
The StripMeister E2000X motor’s frequency is 60Hz.
-
What is the rated input of the StripMeister E2000X?
The StripMeister E2000X rated input is 10.8 AMP.
-
What size wire can I strip with the StripMeister E2000X?
The StripMeister E2000X can strip between 16 AWG to 2000 MCM or .1″ to 3-1/8″ in diameter.
-
How much does the StripMeister E2000X weigh?
The StripMeister E2000X weighs 72 lbs.
-
How many phases is the StripMeister E2000X?
The StripMeister E2000X has 1 phase.
-
What are the shipping dimensions of the StripMeister E2000X?
The StripMeister E2000X shipping dimensions are 22′ wide x 25″ High x 19″ deep.
- What type of fuse does the StripMeister E2000X use?
-
What voltage does the StripMeister E2000X run off of?
The StripMeister E2000X runs off any standard 110/120V household outlet.
-
Can the StripMeister E2000X run on 220 Volts?
The StripMeister E2000X can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
-
How long will it take to receive my StripMeister E2000X?
We utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister within 5 to 7 business days.
-
What is the blade depth of the StripMeister E2000X?
For the StripMeister E2000X, the blade depth is 0.725″ however the StripMeister E2000X can handle up to 3.125″ OD with insulation on.
-
Where can I check the fuse on the StripMeister E2000X?
To check the fuse on the StripMeister E2000X follow these 4 easy steps:
- Unplug the StripMeister E2000X
- Locate the panel below the power button.
- Remove the 4 M3 screws
- The fuse will be located directly inside.
If the fuse needs to be replaced:
To replace the StripMeister E2000X fuse you will need a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the fuse by clicking this link.
-
How to stop the wire from slipping to the side when stripping?
When you are stripping wire with the StripMeister E20000X and experience the wire slipping to the side just turn the handle 1/4 a turn at a time to raise the blade. The wire slips because the blade is too deep on the wire.
-
How fast can the StripMeister E2000X strip solid #12 wire?
The StripMeister E2000x wire stripping machine can strip #12 gauge wire at 57 feet per minute.
-
How long can the StripMeister E2000x strip wire for?
The StripMeister E2000X wire stripping machine is made for industrial continuous use. You can operate the StripMeister E2000x continuously in 8,16, or even 24 plus hours.
-
What is the most recommend way to secure the device to strip wire?
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
-
What type of grease should I use on my StripMeister E2000X?
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general purpose white grease that is low odor, non staining, NLGI grade 2 grease.
-
Where do I grease on my StripMeister E2000X?
On the StripMeister E2000X there are 3 grease nipples. The first 2 are in the back of the machine on the knife carriage and these are for the knife slider. The other grease nipple is on the side of the StripMeister E2000X above the Caution sign. To see precisely where these nipples on the StripMeister E2000X is please consult page 6 of the StripMeister E2000X owners manual.
To see what type of grease you need click this link.
-
How fast can the StripMeister E2000X strip wire?
WE’RE HERE FOR YOU.
LIVE SUPPORT HOURS
Monday – Friday 8:00 AM–04:00 PM EST