Attach the cordless or corded drill gun to the 5/16” Dia. Feeder Shaft and tighten

How to use a wire stripper

For most electricians how to use a wire stripper is pretty straight forward and common sense.

However, here we have put together some simple instructions on how to operate the StripMeister™ to get the most out of your wire stripper experience.

Secure the StripMeister™ to your workbench using the screws suppped thru the mounting holes

secure wire stripper to the bench

Attach the cordless or corded drill gun to the 5/16” Dia. Feeder Shaft and tighten

Attach the cordless or corded drill gun to the 5/16” Dia. Feeder Shaft and tighten

Loosen the front wire guide to enable the wire to hit the Feeder Drive v-groove Loosen front guide of the wire stripper machine

Place the wire through the wire guide onto the Feeder Drive v-groove


Lower the Knife Blade to touch the insulation/plastic, move the Front Wire guide down so the wire feeds in an 10-20 deg. angle


Tighten adjustment knob for front wire guide on the left side


Remove Wire

Bring the Knife blade down with the adjustment knob for the knife blade by one and a quarter turns


Start your drill gun, insert the wire and it will start cutting.

Wire comes out of the back of the machine with a cut down that Center off the wire or cable


Peel or strip the installation off


Once the machine is set for one size of wire, you can strip that size continuously without adjusting your machine.

And that’s how to use a wire stripper. Easy huh.

Get your StripMeister™ today!

How to change the blade on your StripMeister™ [Video]

Changing the blade on the StripMeister™ is very easy and takes less than 2 minutes. Watch this quick video for the simple steps.

Get your StripMeister™ today!

copper wire stripper

5 Copper Wire Stripper Tips: Suggestions That Will Help You Get More Out of Your Machine

If you own a copper wire stripper or plan to purchase one, there are a few things you should know to help you get the most out of your investment. This type of wirecutter can be very profitable.

Many find that the amount they pay up front is more than covered by the amount they make recycling bare copper wire their first time. The price of stripped wire has risen to over $3 per pound. That can work out to a lot of cash in your pocket if you’re willing to spend a little bit of time using your wire stripper!

Automatic wire stripping machine

Copper Wire Stripper Tip 1: Read the Manufacturer’s Instructions before You Start Stripping

Many copper wire stripper models may seem very similar, but it’s still important to read the manufacturer’s instructions before you begin. Some models include separate parts that are needed to accommodate different sizes of wire. If you buy a model like the Stripmeister™, you won’t have to deal with extra parts just to cut different gauges. Make sure you know exactly what is and isn’t needed before you attempt your first stripping.

Copper Wire Stripper Tip 2: Make Sure Your Drill Meets the Size Requirements of the Machine

The good news is that most standard drills can be used with your copper wire stripper. Some models may have variations, so make sure you check the sizing requirements before you try to use the machine. You generally won’t need to own a specific drill brand or model, but your drill chuck will most likely have to be a minimum of 5/16”. If you own a drill, chances are it will meet this size requirement.

Copper Wire Stripper Tip 3: A Clean Machine Works More Efficiently

The copper wire stripper requires very little maintenance, which is great if you’re trying to save time. That being said, you should still make a point to clean up your wirecutter after each use. Just like any other tool in your workshop, you need to make sure the machine is free of debris. The cleaner it is, the more efficiently it will work and the longer it will last! If you want to get the highest return on your investment, then regular cleaning is a good way to go.

Copper Wire Stripper Tip 4: Know Your Wire Stripper’s Limitations

Most copper wire strippers can handle most wire types. The Stripmeister™, for example, can take on house wire, THNN, XHHW, rubber cord, welding cable, old cloth insulation, tray cable, Romex 1, Romex 2 and XLP. Other models all have a different acceptable wire list, so make sure you know what can be cut before you buy or use the machine. Models that can handle more types are generally going to be better because you will have far more flexibility (which means more potential to earn money).

Copper Wire Stripper Tip 5: Know Where You Can Find Replacement Parts

Wirecutter blades will sometimes dull or a part may need to be replaced. Make sure you know exactly where to go for these types of items. The cable stripping machine manufacturer’s website should provide this information so you don’t have to go far to change out a dull blade or make a repair. If this information isn’t provided, you may want to consider looking for a different model. A reliable copper wire stripper seller should be customer-friendly and make information easy to access. The StripMeister™ comes with an extra blade for super long lasting blade life.

Get your StripMeister™ today!

Wire Stripper Machine

The Wire Stripper Machine: A Quick Overview for People Who Still Use Basic Wirecutters

The wire stripper machine has been around for a while now, yet some still haven’t discovered the many benefits of this powerful device. You could be missing out on serious profits from recycling copper and aluminum wire. The first step to find out how to make money from this convenient cable stripping machine is to learn what it is and how to get it.

What is a Wire Stripper Machine?

Sometimes referred to as an automatic wire stripper, the wire stripper machine is a relatively compact device that allows for the quick and easy separation of valuable wire from its protective casing and insulation. If done by hand, you would need a wirecutter and some kind of flat blade to make incisions and tear off the casing by hand. This method works, but it takes far more time and can be very frustrating.

The wire stripper machine dramatically cuts down on time by providing a surface made specifically to cut wire from its insulation. A hole or opening is available, usually with various sizes to accommodate different types of wire. The end of the wire to be cut is inserted and a spinning blade inside the machine creates a clean, length-wise incision along the exterior. The wire can then be easily pulled out and recycled.

What’s the Point of Stripping Wire?

If you don’t care about making money when you recycle, then the quickest way to go about the process is to turn in wire as is with its insulation intact. The problem with this approach is that you will make far less money. Those who use a wire stripper machine often find that they earn 3 to 4 times more for their wire than those who do nothing with it before recycling. You will also save the recycling center time by eliminating the wire separation step.

What Are the Drawbacks of Buying a Wire Stripper Machine?

There are really only two drawbacks to buying a wire stripper machine. First being that you will have to invest a little bit of cash up front to purchase the unit. Don’t worry about the price, though. It’s really an investment rather than an expense because you will quickly earn back what you paid out and then some.

The other drawback is the need to occasionally replace the blade. Any cutting surface that is used often is eventually going to become dull. This generally takes a very long time when the wire stripper machine is used as recommended by the manufacturer. It’s also an expense that is easily covered by cash earned from recycling bare wire. The positive side is, with the StripMeister™, your blade will last up to 10x that of most others.

How Can I Buy a Wire Stripper Machine?

If you’re ready to upgrade those old wirecutters to a practical cable stripping machine, consider starting on the internet. Many models are available and can be easily researched on the web. Always look for a website that offers good information on their product as well as easy access to FAQs, policies and model specs like

A quality wire stripper machine will generally cost a few hundred dollars, so make sure you shop carefully when browsing cheaper models. Some look appealing but come with cumbersome separate parts or aren’t made to industrial standards. When you invest in a cable stripping machine that will last, you will get far more out of the purchase.

Get your StripMeister™ today!

StripMeister™ Details & Specs

Details and Specifications

  • Wirecutter Gauge Range: 14AWG – 250MCM ( Diameter from 0.062″ or 1.5 mm up to 0.79″ or 20.1 mm)
  • Weight:3.3 Lbs
  • Speed of Wire Stripping: Up to 120 Feet/Min (1440″)
  • Size:8.495″(Max. Height) x 4.055(Width) x 5.875″(Depth)
  • Wire Stripper Blade : Hardened and coated Tool Steel
  • Cable stripper Feeder: Surgical Stainless Steel
  • Body Material: Aircraft Grade Aluminum