StripMeister™ Wire Stripping Videos

StripMeister™ Videos

Attach the cordless or corded drill gun to the 5/16” Dia. Feeder Shaft and tighten

How to use a wire stripper

For most electricians how to use a wire stripper is pretty straight forward and common sense.

However, here we have put together some simple instructions on how to operate the StripMeister™ to get the most out of your wire stripper experience.

Secure the StripMeister™ to your workbench using the screws suppped thru the mounting holes

secure wire stripper to the bench

Attach the cordless or corded drill gun to the 5/16” Dia. Feeder Shaft and tighten

Attach the cordless or corded drill gun to the 5/16” Dia. Feeder Shaft and tighten

Loosen the front wire guide to enable the wire to hit the Feeder Drive v-groove Loosen front guide of the wire stripper machine

Place the wire through the wire guide onto the Feeder Drive v-groove


Lower the Knife Blade to touch the insulation/plastic, move the Front Wire guide down so the wire feeds in an 10-20 deg. angle


Tighten adjustment knob for front wire guide on the left side


Remove Wire

Bring the Knife blade down with the adjustment knob for the knife blade by one and a quarter turns


Start your drill gun, insert the wire and it will start cutting.

Wire comes out of the back of the machine with a cut down that Center off the wire or cable


Peel or strip the installation off


Once the machine is set for one size of wire, you can strip that size continuously without adjusting your machine.

And that’s how to use a wire stripper. Easy huh.

Get your StripMeister™ today!

How to change the blade on your StripMeister™ [Video]

Changing the blade on the StripMeister™ is very easy and takes less than 2 minutes. Watch this quick video for the simple steps.

Get your StripMeister™ today!

copper wire stripper

5 Copper Wire Stripper Tips: Suggestions That Will Help You Get More Out of Your Machine

If you own a copper wire stripper or plan to purchase one, there are a few things you should know to help you get the most out of your investment. This type of wirecutter can be very profitable.

Many find that the amount they pay up front is more than covered by the amount they make recycling bare copper wire their first time. The price of stripped wire has risen to over $3 per pound. That can work out to a lot of cash in your pocket if you’re willing to spend a little bit of time using your wire stripper!

Automatic wire stripping machine

Copper Wire Stripper Tip 1: Read the Manufacturer’s Instructions before You Start Stripping

Many copper wire stripper models may seem very similar, but it’s still important to read the manufacturer’s instructions before you begin. Some models include separate parts that are needed to accommodate different sizes of wire. If you buy a model like the Stripmeister™, you won’t have to deal with extra parts just to cut different gauges. Make sure you know exactly what is and isn’t needed before you attempt your first stripping.

Copper Wire Stripper Tip 2: Make Sure Your Drill Meets the Size Requirements of the Machine

The good news is that most standard drills can be used with your copper wire stripper. Some models may have variations, so make sure you check the sizing requirements before you try to use the machine. You generally won’t need to own a specific drill brand or model, but your drill chuck will most likely have to be a minimum of 5/16”. If you own a drill, chances are it will meet this size requirement.

Copper Wire Stripper Tip 3: A Clean Machine Works More Efficiently

The copper wire stripper requires very little maintenance, which is great if you’re trying to save time. That being said, you should still make a point to clean up your wirecutter after each use. Just like any other tool in your workshop, you need to make sure the machine is free of debris. The cleaner it is, the more efficiently it will work and the longer it will last! If you want to get the highest return on your investment, then regular cleaning is a good way to go.

Copper Wire Stripper Tip 4: Know Your Wire Stripper’s Limitations

Most copper wire strippers can handle most wire types. The Stripmeister™, for example, can take on house wire, THNN, XHHW, rubber cord, welding cable, old cloth insulation, tray cable, Romex 1, Romex 2 and XLP. Other models all have a different acceptable wire list, so make sure you know what can be cut before you buy or use the machine. Models that can handle more types are generally going to be better because you will have far more flexibility (which means more potential to earn money).

Copper Wire Stripper Tip 5: Know Where You Can Find Replacement Parts

Wirecutter blades will sometimes dull or a part may need to be replaced. Make sure you know exactly where to go for these types of items. The cable stripping machine manufacturer’s website should provide this information so you don’t have to go far to change out a dull blade or make a repair. If this information isn’t provided, you may want to consider looking for a different model. A reliable copper wire stripper seller should be customer-friendly and make information easy to access. The StripMeister™ comes with an extra blade for super long lasting blade life.

Get your StripMeister™ today!

Wire Stripper Machine

The Wire Stripper Machine: A Quick Overview for People Who Still Use Basic Wirecutters

The wire stripper machine has been around for a while now, yet some still haven’t discovered the many benefits of this powerful device. You could be missing out on serious profits from recycling copper and aluminum wire. The first step to find out how to make money from this convenient cable stripping machine is to learn what it is and how to get it.

What is a Wire Stripper Machine?

Sometimes referred to as an automatic wire stripper, the wire stripper machine is a relatively compact device that allows for the quick and easy separation of valuable wire from its protective casing and insulation. If done by hand, you would need a wirecutter and some kind of flat blade to make incisions and tear off the casing by hand. This method works, but it takes far more time and can be very frustrating.

The wire stripper machine dramatically cuts down on time by providing a surface made specifically to cut wire from its insulation. A hole or opening is available, usually with various sizes to accommodate different types of wire. The end of the wire to be cut is inserted and a spinning blade inside the machine creates a clean, length-wise incision along the exterior. The wire can then be easily pulled out and recycled.

What’s the Point of Stripping Wire?

If you don’t care about making money when you recycle, then the quickest way to go about the process is to turn in wire as is with its insulation intact. The problem with this approach is that you will make far less money. Those who use a wire stripper machine often find that they earn 3 to 4 times more for their wire than those who do nothing with it before recycling. You will also save the recycling center time by eliminating the wire separation step.

What Are the Drawbacks of Buying a Wire Stripper Machine?

There are really only two drawbacks to buying a wire stripper machine. First being that you will have to invest a little bit of cash up front to purchase the unit. Don’t worry about the price, though. It’s really an investment rather than an expense because you will quickly earn back what you paid out and then some.

The other drawback is the need to occasionally replace the blade. Any cutting surface that is used often is eventually going to become dull. This generally takes a very long time when the wire stripper machine is used as recommended by the manufacturer. It’s also an expense that is easily covered by cash earned from recycling bare wire. The positive side is, with the StripMeister™, your blade will last up to 10x that of most others.

How Can I Buy a Wire Stripper Machine?

If you’re ready to upgrade those old wirecutters to a practical cable stripping machine, consider starting on the internet. Many models are available and can be easily researched on the web. Always look for a website that offers good information on their product as well as easy access to FAQs, policies and model specs like

A quality wire stripper machine will generally cost a few hundred dollars, so make sure you shop carefully when browsing cheaper models. Some look appealing but come with cumbersome separate parts or aren’t made to industrial standards. When you invest in a cable stripping machine that will last, you will get far more out of the purchase.

Get your StripMeister™ today!

StripMeister™ Details & Specs

Details and Specifications

  • Wirecutter Gauge Range: 14AWG – 250MCM ( Diameter from 0.062″ or 1.5 mm up to 0.79″ or 20.1 mm)
  • Weight:3.3 Lbs
  • Speed of Wire Stripping: Up to 120 Feet/Min (1440″)
  • Size:8.495″(Max. Height) x 4.055(Width) x 5.875″(Depth)
  • Wire Stripper Blade : Hardened and coated Tool Steel
  • Cable stripper Feeder: Surgical Stainless Steel
  • Body Material: Aircraft Grade Aluminum

Make your money back in hours

With copper prices currently exceeding $3 per lb, it’s crazy not to get the maximum dollar value out of your left over scrap copper wire.

By utilizing our wire stripping machine the StripMeister™ you will find that this is entirely possible to do.

Why let the scrap yards reap the rewards from YOUR scrap wire!!

Whether you are cutting an assortment of sizes to a standard size of wire, your “loot” is worth the time you invest in our automatic wire stripper. We ran a test involving an assortment of copper wire sizes as depicted above in one hours time. The end result was 51.21 lbs. We also ran a variety of other tests to determine what we were looking at regarding the output of this wire stripping machine. The results were incredible! In one hour using #8 wire, you can manage 42 lbs, # 3 wire resulted in 105 lbs in an hour and 3/0 wire racked up a whopping 216 lbs of wire in just an hours time! Even making the necessary adjustment to switch between the different wire sizes took seconds!

When you calculate the weight you have achieved with the current copper prices it’s not difficult to see why this copper wire stripper is essential to have.

It literally takes no time at all for this machine to pay for itself!!

Not only will you make extra cash in a short amount of time, you are doing your part by recyclying copper wire which is important to our environment.

Get your StripMeister™ today!

StripMeister Wire Stripper

Why Choose a StripMeister™

StripMeister Wire StripperThe StripMeister™ has so many compelling reasons why it is the top choice for your wire stripping needs. Here are a few:

Constructed from Solid aircraft grade aluminum alloy – will never bend or distort will literally outlast any other tool in your tool box!

All precision machined with 5axis CNC milling technology – (no other wire stripper fits so well together and operates so smooth)

Fit and finish is far superior to that of all competitor models – all components have been precision machined and finished

Order taken and shipped immediately from warehouse– ensuring prompt delivery (don’t wait 4 weeks or more – start making money now)

Built in “ROMEX” adapter:

  • Enables multi-layer wires to be cut in one shot – will save an additional 33%of your time over other automatic wire strippers
  • Prevents thin and soft wire from escaping the blade – other wire strippers often jump the track which wastes time

Can easily be mounted in three convenient methods:

  • Clamp on bench
  • Bolt down on wood or bench
  • Secure in a vise (this is not a hand-held device..)

German engineered and made in North America

300% return on your scrap copper wire when it is stripped

The value of bright copper wire is 3-4 times that of insulated wire. If you normally sell insulated wire to a salvage yard, you can be guaranteed that the StripMeister™ will pay for itself in possibly one visit

You can strip thousands of feet of wire in the time it would take you to do a few hundred by hand. No longer do you have to use the Utillity knife or hecksaw to remove the insulation from the copper wire

With this process you are sustaining the environment by recycling the materials

Perfect inexpensive Solution for Home Owners, Scrappers, workshops, Electricians and recyclers alike

No tools required! (unlike some other machines)to adjust the machine for different wire-sizes—because you WILL lose them

Get your StripMeister™ today!

Compare the StripMeister™

Here is a comprehensive comparison list of how the StripMeister™ outshines the competitors

Wire Stripper Features

  • Brand
    wire sizes
  • Wire Capacity
    wire sizes
  • Knife Material
    What the blade is made from
  • Life of Knife
  • V Groove Wire Feeder to Fit All Diameters of Wire
  • Knife Replacement Difficulty
  • Stainless Steel Wire Feeding Wheel
  • Stainless Steel Hardware
  • Portability
  • Appearance and Finish
  • Warranty
  • Price
  • StripMeister
  • 18AWG to 250MCM
  • High alloy steel
  • Long
  • Very Easy
  • Yes (3lbs)
  • Stainless Steel Finish
  • 1 Year
  • $179
  • TNT
  • 18AWG to 6Awg
  • Tool Steel
  • Short
  • Average
  • Yes (3lbs)
  • Raw Material
  • 60 Days
  • $299
  • Maple Legend
  • 14AWG to 1"OD
  • High Speed Steel
  • Short
  • Difficult
  • No (Heavy and too many parts)
  • Raw Material
  • 1 Year
  • $477
  • Eco-15
  • 0.04"-0.6"
  • N/A
  • Short
  • Average
  • No (24 Lbs)
  • Paint
  • N/A
  • $995

The ULTIMATE Wire Stripping Machine

The StripMeister™ Automatic Wire Stripping Machine is the Ultimate and reliable way to strip all types of wires

Get your StripMeister™ today!