If you own a copper wire stripper or plan to purchase one, there are a few things you should know to help you get the most out of your investment. This type of wirecutter can be very profitable.
Many find that the amount they pay up front is more than covered by the amount they make recycling bare copper wire their first time. The price of stripped wire has risen to over $3 per pound. That can work out to a lot of cash in your pocket if you’re willing to spend a little bit of time using your wire stripper!
Copper Wire Stripper Tip 1: Read the Manufacturer’s Instructions before You Start Stripping
Many copper wire stripper models may seem very similar, but it’s still important to read the manufacturer’s instructions before you begin. Some models include separate parts that are needed to accommodate different sizes of wire. If you buy a model like the Stripmeister™, you won’t have to deal with extra parts just to cut different gauges. Make sure you know exactly what is and isn’t needed before you attempt your first stripping.
Copper Wire Stripper Tip 2: Make Sure Your Drill Meets the Size Requirements of the Machine
The good news is that most standard drills can be used with your copper wire stripper. Some models may have variations, so make sure you check the sizing requirements before you try to use the machine. You generally won’t need to own a specific drill brand or model, but your drill chuck will most likely have to be a minimum of 5/16”. If you own a drill, chances are it will meet this size requirement.
Copper Wire Stripper Tip 3: A Clean Machine Works More Efficiently
The copper wire stripper requires very little maintenance, which is great if you’re trying to save time. That being said, you should still make a point to clean up your wirecutter after each use. Just like any other tool in your workshop, you need to make sure the machine is free of debris. The cleaner it is, the more efficiently it will work and the longer it will last! If you want to get the highest return on your investment, then regular cleaning is a good way to go.
Copper Wire Stripper Tip 4: Know Your Wire Stripper’s Limitations
Most copper wire strippers can handle most wire types. The Stripmeister™, for example, can take on house wire, THNN, XHHW, rubber cord, welding cable, old cloth insulation, tray cable, Romex 1, Romex 2 and XLP. Other models all have a different acceptable wire list, so make sure you know what can be cut before you buy or use the machine. Models that can handle more types are generally going to be better because you will have far more flexibility (which means more potential to earn money).
Copper Wire Stripper Tip 5: Know Where You Can Find Replacement Parts
Wirecutter blades will sometimes dull or a part may need to be replaced. Make sure you know exactly where to go for these types of items. The cable stripping machine manufacturer’s website should provide this information so you don’t have to go far to change out a dull blade or make a repair. If this information isn’t provided, you may want to consider looking for a different model. A reliable copper wire stripper seller should be customer-friendly and make information easy to access. The StripMeister™ comes with an extra blade for super long lasting blade life.